ENHANCED VIRTUAL PROCEDURE TRAINER

A320 EVPTB747 EVPTE190 EVPT

The Enhanced Virtual Procedure Trainer features all elements of the Standard VPT incorporated into a design that looks and feels more like the actual flight deck than ever before. With built in aircraft type seats, more contouring and an aircraft like flight deck enclosure; trainees will be truly immersed in the simulation.

Specialty Training

The addition of flight controls and a visual system take the Virtual Procedure Trainer to the realm of ground operations and in-flight training. Even more events that were previously practiced on the full flight simulator now can be perfected in the Virtual Procedure Trainer at a fraction of the cost.

These items include:

  • Low visibility taxi
  • Runway incursion scenarios
  • CAT II/III Approaches, Landings, and Missed Approach
  • Non-precision Approaches and Landings
  • TCAS scenarios including TA, RA, and recovery procedures
  • Weather radar and EGPWS scenarios with visual correlation
  • Special airport training with visual correlation
  • Description
  • Specs
  • Slideshow

Base Package

The Enhanced VPT provides users with a graphical (via touch panel displays) and tactile representation of the cockpit including simulation of aircraft systems. The trainer can be used as a ground and flight procedure trainer under normal and non-normal conditions. Aural and visual warnings and cautions will be duplicated.

The PC-based training device provides simulation and display of most aircraft systems including displays, panels and indications. All systems are fully interactive and operate in free-play.  The trainer is an open cockpit design utilizing LCD touch panel displays depicting a graphical representation of the flight deck including the overhead panel, dual sided EFIS displays (PFD & ND), upper and lower displays and the pedestal for FMS, thrust levers, flap lever, speed brake lever and other components. An additional touch panel display is provided for the instructor station.

The Glareshield will incorporate Simulated Aircraft Hardware (SAH) to provide students and instructors with tactile feel. An additional touch panel display is provided for the Instructor Operating Station; with two (2) additional touch panel displays for the Active System Schematics.

Flight Controls Package

The addition of flight controls and a visual system take the Virtual Procedure Trainer to the realm of ground operations and in-flight training. This package includes all features of the Enhanced VPT Base Package plus: control column/side stick, enhanced aero model, rudder pedals and brakes.

Taxi Package

Aerosim's Enhanced Virtual Procedure Trainer Taxi Package maximizes the range of training events that can be accomplished on this device. This package includes all features of the Enhanced VPT Flight Controls Package plus: steering tiller and three channel (135º) visual system.

Flight Controls Package


Floor Space   Recommended minimum (with single channel visual): 15’ x 15’ (approximately 4.6m x 4.6m)
Trainer with visual: 11’ wide x 11’ deep (approximately 3.4m x 3.4m)
Access Clearance: 2’ on all sides (.61m)
Height   The highest point of the trainer is 7 feet high (2.2m)
Power   Two 20A, 120VAC 60Hz (Two 10A, 220VAC 50Hz) circuits are required.

 

Taxi Package


Floor Space   Recommended minimum with visual: 15’ x 15’ (approximately 4.6m x 4.6m)
Trainer with visual: 13’ wide x 11’ deep (approximately 4.0m x 3.4m)
Access Clearance: 2’ on all sides (.61m)
Height   The highest point of the trainer is 7 feet high (2.2m)
Power   Three 20A, 120VAC 60Hz (Three 10A, 220VAC 50Hz) circuits are required.